chromatic aberration
Quartz resin content is low, more than 90% of quartz, quartz mining are natural mines, that is, more than 90% of its ingredients are derived from natural. Although the quartz color of most mines is white, but there are also differences, some are yellow, some are blue, sometimes the same mine, the peaks of the mountain and the tail out of the quartz color is also slightly different. According to this situation, quartz stone plate generally have a slight color difference, through the factory inspection of color plate, color the same batch number of the product is consistent (but with a common artificial stone standard compared to a low point, difficult seam stitching), plates of different batches of products have a slight color difference. When processing, must use the same batch of plates to connect, does not permit the different batch number plate to connect. If the same number of plates after the connection there is a big difference (slight color difference is a normal phenomenon), please first confirm whether the plate grinding degree is consistent, the dark plate grinding degree will directly affect the color difference. Next, wipe with a damp cloth after wet and confirm under natural light. It is better to stand at the same angle to observe.
impurity
Because of quartz stone board, more than 90% of its ingredients are from natural, quartz ore will have yellow, so the quality of quartz sand impurity control relative to ordinary man-made stone raw materials difficult. In addition, the quartz stone plate has high hardness and the repairing process is difficult for ordinary artificial stone plates. In general, quartz stone plate surface will have 1mm miscellaneous points, it is a normal phenomenon, more than the size or glare of the impurities can be removed by patching method.
Crack
Quartz stone is after vacuum high pressure molding products, low resin content, high hardness, toughness is lower than ordinary people, although the quartz stone containing compound materials improve the toughness, impact resistance is relatively high, but still want to avoid a table or table, frequently used gravity compression percussion table hanging parts in particular, the weak parts of the table, such as cooking, near the corner, near the basin, joint parts and large span the middle part. Generally speaking, when all corner mesa design shall be R25mm above the corner; a stove mouth, mouth four Gong gong machine application front skirt, straight edge; after the block should be tightly bonding under water; prohibited in the holes, the corner cabinets installed to access; level; the largest span should not exceed 600mm support table.
Connection joint
Quartz stone is of high hardness and low resin content. It is closer to natural stone than ordinary man-made stone. When the stone is connected, the stitching will have traces like lines, but it is difficult to see without looking at it, and it does not affect the appearance. Generally speaking, the quartz stone products can be seamlessly spliced under the production of skilled quartz stone processing master.
